Tag Archives: tiles and bath

Best DIY Guide to Prep Your Floor to Install Floor Tiles Installation

Best DIY Guide to Prep Your Floor to Install Floor Tiles Installation

There is nothing like fulfilling a job well done in installing floor tiles. Fold your arms and pose like a superhero, then pat yourself on the back with that in mind. You will do all of that while standing on your new floor tiles. But while laying your floor tiles can be a beautiful and satisfying project for the DIYers to attempt, it is filled with areas for many potential mistakes.

This article will walk through the critical steps, including essential tools and pitfalls to look out for when installing your floor tiles, as you take a run at prepping, tiling, and grouting.

Part one will cover the most critical and often overlooked step, proper preparation. Tiling relies heavily on adequate surface and substrate preparation like many mini home improvement projects. Saying it is crucial would be an understatement, and that is why it gets its particular part of this series. In the coming write-up, we will go through the meat of how actually to lay your floor tiles and grout them.

So let’s look at what you will need to start preparing your ground surface for floor tile installation, including all the essential tools and some other things to watch out for when attempting this elementary stage of the project.

Tools Needed for Floor Tiles Preparation

Here’s a rundown of tools you will need to prep your floor and create adequate space for floor tile installation:

  • Safety & Comfort

These are goggles or Safety Glasses and Knee Pads;

  • For Prepping a Plywood Subfloor

1/4″ Cement Board, Backerboard Screws, Saw, and Crack-Prevention Membrane.

  • Squaring Room

Tape Measure, Chalk Line, Carpenter’s Square, and Hairspray (optional)

Best DIY Guide to Prep Your Floor to Install Floor Tiles Installation

Steps To Successful Prep your Floor for Floor Tile Installation 

Remember, these basic steps apply to all floor tiles: kitchen floor tiles, bathroom floor tiles, mosaic floor tiles, stone, ceramic floor tiles, porcelain floor tiles, and more. In short, if you’re starting with tiling, floor tiles would be a much better place to begin than a backsplash, as installing tile on a wall would require even more skill due to the vertical nature of walls tangent with the effect of gravity.

No step-by-step guide is 100 percent exhaustive. And, every project is quite different. In your home, you will encounter something not mentioned in this guide or any other tile tutorial you find elsewhere. But, if you follow these steps, generally, you will find success in your project. Click here for more types of flooring.

So, let’s go into details. 

Step 1: Prep the Subfloor

If there is one step that is the most important, it is this one. This one is a very crucial fact to note. First things first, what is a subfloor? It’s a catch-all term for the floor tiles underneath your finished flooring. Meanwhile, the two primary types of subfloor are wood and concrete. And both suffer from the same movement issue. Wood flexes with humidity and changes in temperature; concrete can shift depending on humidity, moisture, soil movement, and temperature.

Remove any staples and drive all screws or nails sticking up too far. You can install a cement backer board to set a good base for your tile and prevent any movement-related cracking of floor tiles or grout.

The backer board is screwed down to the wood subfloor using specific backer board screws and mortared down with adhesive plywood subfloor. Remember to tape carefully and mortar all the joints between the pieces of the backer board. The crack prevention membrane is spread down on the surfaces. This membrane acts as a waterproofing substance and is an addition in a wet area, a second floor, or a plywood floor application. A notched trowel spreads the mortar at a 45-degree angle to the plywood subfloor.

 Concrete Subfloors

For concrete subfloors, you need to remove any old adhesive and patch/fill any cracks with the appropriate product. The patch item varies based on the size of the holes you want to fill. Use a good floor scraper to remove any debris. That may require some elbow grease and possibly a grinder to withdraw from the subfloor and let the new mortar bond for old adhesives.  You can install your floor tiles directly onto a concrete subfloor.

Whether wooden or concrete, it is vital that you make your subfloor clean and debris-free.

Step 2: Determine where you will start and Practice Lay Pattern

Laying out your floor tile pattern, planning for furniture, cabinets, and the likes in advance is critical to minimizing waste and making the job go as smoothly as possible.

There are several patterns to choose from, though some work better with specific tile shapes and sizes. Recently, herringbone, brick bond, and basket-weave/parquet have been very popular. You should determine this before selecting your floor tiles. Still, a linear or grid pattern is timeless and easy to install if you use traditional square floor tiles. These floor tiles are laid next to each other in the way you envision your mind as you read this. Yes, that one.

Determine your starting point in the room. Typically, you will want whole floor tiles in your room’s visible or focal points and cut the tiles against cabinets or less visible parts of the room. Measure your room space to determine the center, and snap some chalk lines on the ground to guide your installation. Make sure you leave equal space at both sides, so you do not tile up to one part with a full tile and have a cut tile on the other. Every space is unique, so take time to plan accordingly. The goal is to lay many full-field floor tiles down and leave the custom-cuts for around obstacles and against the outside wall areas.


Things can worsen if you don’t properly prepare your floor before playing with your floor tiles. Since proper preparation prevents poor performance, It is essential that you first take care of your subfloor, ensuring you lay it smoothly. It is also crucial to check out the slope of your floor. Your floor preparation determines the overall result of your tiling project. Adhering to the tips will give you perfect flooring. Also checkout: What You Should Know Before Buying Bathroom Tapware 

The right tapware for your bathroom will bring the whole space together!

What You Should Know Before Buying Bathroom Tapware

It is impossible to deny the fact that tapware has evolved into something of an architectural feature in the home, despite the fact that they are one of the more minor qualities present in a bathroom. Consequently, which bathroom faucets are the most suitable for your home’s needs? Even as you put the last touches on your bathroom, we’ll discuss some of the characteristics to look for in faucets and other tapware as you complete your final touches.

Determine what kind of faucets will work best in your ideal area.

When creating your ideal bathroom, it is important to choose laundry tapware that is complementary to the overall style of the space. Are you more attracted to a traditional and classic design, or are you more attracted to a sleek and modern style?

Three parts are used to tap the table.

When it comes to bathroom design, a set of three-piece taps is perfect for people who like a more classic type of decor. This type of tapware, which has a separate spout, is very flexible and may be used in a number of applications, including showers, bathtubs, and sinks, among others. Despite the fact that they are regarded to be the conventional option of tapware, these faucets are available in a wide range of colors and styles, guaranteeing that there is something to fit any kind of bathroom decor.

Keep in mind that whether you are remodeling or starting from new, your choice of tapware will be affected by your financial constraints. With the addition of additional living spaces, the ability to choose one’s own tapware has grown in importance. Those who are remodeling an existing area will almost certainly be obliged to utilize the same kind of taps that were originally placed in the space.

Activates the mixer by pressing a button.

Using a mixer tap to give your bathroom a sleek and modern look is a fantastic method to do this. It is available in a number of different designs and colors. If you have a basin mixer tap or a shower mixer tapware, you can regulate both hot and cold water flow with a single lever. Simple to use, single-handle mixer taps allow you to find the perfect temperature of water by turning the handle just a little bit more.

One of the most advantageous aspects of both the three-piece faucet and the mixer faucet is that they may be installed either on the wall or on the hob, depending on your choice. This gives you the opportunity to not only choose a style that you enjoy, but also one that is complementary to your basin, bath, or shower as well.

When everything is put together, the appropriate finishing touch is applied.

So, which finish would be the best choice for your three-piece or mixer faucet? Fortunately, each of these tap types is available in a number of finishes, which allows you to really customize your tapware to fit the overall design aesthetic of your bathroom.

Tapware with the hue of black is available.

In recent years, black tapware has become one of the most popular trends in the bathroom, and it is simple to see why. Choosing dark-colored tapware for your bathroom not only adds a dramatic point of contrast to the space, but it also gives a very clean finish to the room. The time has arrived for those of you who want to create a beautiful and contemporary bathroom space: it is now necessary to replace your bathroom taps with black, as this trend will not be going away anytime soon.

Nickel faucets, often known as brushed nickel faucets, are a kind of faucet that is constructed of nickel.

When it comes to incorporating the traditional silver tapware into the modern bathroom, brushed nickel tapware, which lends a contemporary twist to classic chrome, is an ideal choice. matte chrome is a great option for those looking to create a neutral and harmonious atmosphere since it can be utilized to complement a broad variety of color schemes and is very versatile. For your bathroom area, take into mind this brushed bath tapware!

The purchasing of gold tapware is possible.

The use of taps in the bathroom has developed in recent years into something of an accessory, with the items being used not just for their original function but also to complement and enhance the overall appearance of the space. After all, what better way to finish off your dream bathroom than by decorating it with gold faucets and other fittings? As a result of their mastery in the technique of gold-plating bathroom faucets, Phoenix currently offers a wide range of styles in this beautiful shade of gold. You can read about What You Should Know Before Buying Bathroom Tapware by clicking here.

Brass tapware is available for purchase.

It’s a relatively new variant on the gold tapware design that’s becoming more popular, but it’s quite similar to the gold style in terms of look and feels. Change the finish of your bathroom taps from chrome to brass if you want to bring a little warmth into your space. This finish also serves as a great point of difference in your bathroom, which will certainly enhance the overall look of your space.

The team at Tile and Bath Co has done an amazing job of bringing this finish to life, and they have a range of sink, bath, and shower taps available if you’re interested in it.

While the look and finish of your tapware are important factors when choosing your tapware, it is also critical to consider the functionality of your faucet when selecting your faucet. These days, a variety of manufacturers provide great water-saving faucets that not only help you conserve water but also help you save money on your water and electricity bills! When looking for water-saving solutions, look for the WELS rating on the product – this indicates how well the product conserves water. The higher the number of stars, the better the efficiency of the water system.